Heating & Air Conditioning Placement is Essential

It is possible to improve the efficiency, operating costs, & service life of an cooling system by placing it consistently.

cooling system air handlers, including the evaporator coil & blower fan, are usually installed indoors, in a dedicated Heating & Air Conditioning closet.

Condenser coils, fans, & compressors make up the other half of a central cooling system. The purpose of a heat exchanger is to receive & disperse compressed heat extracted from the inside of a house. It is not recommended to locate the condenser indoors in an attic or basement. The unit will radiate heat into the living spaces, lowering household cooling efficiency & changing operating costs. In addition, indoor air volume is much lower than outdoor air volume, which will affect air circulation into the coil. A sizzling zone naturally transfers heat more efficiently to a cooler zone. A cool outdoor location out of direct afternoonlight is the best location for the condenser coil to release compressed heat energy into the air. As much as possible, the unit should be positioned in the shade produced by the house. For the outdoor condenser to disperse heat efficiently, satisfactory air circulation is also essential. The unit should have at least multiple feet of open space on all sides to ensure familiar air intake. In addition, the unit should be spaced satisfactoryly away from any thick bushes or other vegetation. When an Heating & Air Conditioning unit is locationd in direct afternoonlight and/or separate from satisfactory air circulation, its compressor motor runs hotter, reducing its lifespan. In the event of an early compressor failure, the entire cooling system may need to be updated.



washable filter






Leave a Reply

Your email address will not be published. Required fields are marked *