It is possible to improve the efficiency, operating costs, plus repair life of an air conditioner by placing it properly. cooling system air handlers, including the evaporator coil plus blower fan, are usually installed indoors, in a dedicated Heating, Ventilation, plus A/C closet. Condenser coils, fans, plus compressors make up the other half of a central air conditioner. The purpose of a heat exchanger is to receive plus disperse compressed heat extracted from the inside of a house. It is not commanded to locate the condenser indoors in an attic or basement. The component will radiate heat into the living spaces, lowering household cooling efficiency plus increasing operating costs. In addition, indoor air volume is much lower than outdoor air volume, which will affect air circulation into the coil. A sizzling zone naturally transfers heat more efficiently to a cooler zone. A cool outdoor location out of direct sunshine is the best arena for the condenser coil to release compressed heat energy into the air. As much as possible, the component should be positioned in the shade produced by the house. For the outdoor condenser to disperse heat efficiently, acceptable air circulation is also essential. The component should have at least 3 feet of open space on all sides to ensure proper air intake. In addition, the component should be spaced acceptablely away from any thick bushes or other vegetation. When an Heating, Ventilation, plus A/C component is sited in direct sunshine and/or without acceptable air circulation, its compressor motor runs hotter, reducing its lifespan. In the event of an early compressor failure, the entire air conditioner may need to be replaced.
Leave a Reply